After-sales service:0769-83223165;Sales consulting:13829221685
Taiwan no.6 turret milling machine

Category:Taiwan no.6 turret milling machine

Summary:Machine characteristics 1. Meehanna high strength casting, high rigidity, high precision, long life 2. Guide rail and table are quenched, quenched, hardened and precisely ground. 3. The guide rail shall be attached with Turcite-B high wear

Inquiry: 138-2922-1685  13712336185

Click here to send me a message

This product has been viewed Time

The detailed information

Machine characteristics
1. Meehanna high strength casting, high rigidity, high precision, long life
2. Guide rail and table are quenched, quenched, hardened and precisely ground.
3. The guide rail shall be attached with Turcite-B high wear resistant film, which is smooth and smooth.
4. Reinforced z-direction, y-direction and z-direction rectangular track with stronger bearing and higher accuracy.
5. Vertical steel head, strong cutting; Elongated bench;
6. Spindle has high precision and strong durability. Spindle cone diameter bobbing control: 0.002-0.005cm. The bedstead column adopts the reinforced double-rib structure, which can ensure the high rigidity of the bed and not easy to deform.
The machine parameters
Machine passes - 6 m
The workbench 1370 * 330 mm
Left and right stroke (X axis) 1000mm
Front and rear travel (Y-axis) 360mm
Up and down stroke (Z axis) 480mm
Spindle tube diameter 105mm
Spindle tube stroke 127mm
Spindle speed 70-3600(10 speed)
Spindle taper hole nt-40
Spindle horsepower 5HP
Maximum distance between spindle end face and work table is 520mm
Machine size (length × width × height) 1600*1800*2400mm
The machine weight is 2200kg
The machine configuration
Standard configuration:
1.X and Y axis 5u grating ruler set
2.X axis cutter 1
3.6 "flat jaw pliers 1
One set of composite platen
5. 1 set of NT40 collet
6. An electrical box
7. Tie article 1
8. One working lamp
9. 1 set of up and down motor
10. 1 set of cooling system (water pan, water pump)
11. One tool box of the toolbox is equipped with:
1. Ring wrenches (19-20) 1
2. 1 cross screwdriver
3. One word screwdriver
4. 4 shock absorbers
5. 1 power cord
1 manual
The latest information

Copyright©2013-2014  Dongguan xinda ultrasonic equipment co. LTD  All rights reserved For the record,ICP 07506421 | Fax :(0769) - | tel: (0769) -83223165 |hjt@dg-xd.com |