After-sales service:0769-83223165;Sales consulting:13829221685
Precision surface grinding machine

Category:Precision surface grinding machine

Summary:Machine characteristics ◆ the bed is made of high grade minas casting, and the guide rail of the worktable is made of plastic guide rail with low resistance and long life. The worktable is heavy and the surface grinding resistance is good

Inquiry: 138-2922-1685  13712336185

Click here to send me a message

This product has been viewed Time

The detailed information
Machine characteristics
◆ the bed is made of high grade minas casting, and the guide rail of the worktable is made of plastic guide rail with low resistance and long life. The worktable is heavy and the surface grinding resistance is good.
◆ the front and back and right and left rails of the work table adopt double V slide to stick the wear-resistant resin turcite-b, and through the precise spatula, not only smooth and wear-resistant, especially suitable for molding and grinding.
◆ the spindle adopts the integrated Taiwan spindle, low voice, no vibration, high precision, the spindle precision is kept within 2u.
The machine parameters
Project model unit M618
Machining capacity table size mm 150*450
Maximum grinding length mm 470
Maximum grinding width mm 160
Distance between spindle center and table mm 400
Standard disk size mm 150*350
Left and right feed manual stroke mm 465
Front and rear feed handwheel feed (per scale) mm 0.02
Handwheel feed (per turn) mm 5
Upper and lower feed handwheel feed (each scale) mm 0.005
Handwheel feed (per turn) mm 1
Grinding wheel size (outside diameter * width * aperture) mm 180*16*32
Maximum spindle speed RPM 3600
Motor spindle motor Hp 1.5
Weight the weight of the machine is kg 850
Dimensions machine dimensions mm 1400*1150*1980
The machine configuration
Standard configuration:
1. 1 set of 2axis 1u grating ruler
2.150*400 precision fine wood disk
3. 1 pot of guide oil
4. An electrical box
5. One working lamp
6. 1 power cord
7. One tool box of toolbox is equipped with:
1. 1 cross screwdriver
2. One word screwdriver
3. Inner hexagon Angle pull 1 set
4. 1 grinding wheel remover
5. Mill 1 chalk pencil
6. Milling stone block 1
7. 1 set of horizontal adjusting screws and pads
1 manual
Special optional configuration:
1. 1 set of vacuuming device
2. 1 set of flushing device
3. 1 set of dual-purpose dry and wet device
The latest information

Copyright©2013-2014  Dongguan xinda ultrasonic equipment co. LTD  All rights reserved For the record,ICP 07506421 | Fax :(0769) - | tel: (0769) -83223165 |hjt@dg-xd.com |